Filter
Top Products
Setting Up a Macintosh Computer
1. At a Macintosh computer, from the Apple menu, select Chooser.
2. The Chooser window then displays an Apple Zone list. Select the Zone name that you
specified when configuring the PRINT SERVER.
Note: If you select a Zone that the PRINT SERVER doesn’t belong to, as you specified in the
previous section, no N7119+ will be displayed in the Step 4.
3. If you are using a PostScript printer you can select the LaserWriter 8 icon.
4. The Chooser window then displays PRINT SERVER (s) featuring the support for
AppleTalk protocol, along with its default Chooser Name in the right-hand Select A
PostScript Printer dialog box.
Note: 1.You may change the default Chooser name and Zone name of a PRINT SERVER by
using your web browser before proceeding with this installation. Please see the
previous section in this chapter for details.
2. If you use Mac OS 8.x or 9.x, please make sure your printer support PostScript.
5. Click Setup… button and choose the PPD file matching your printer, and click OK. If
your printer does not appear in the PPD file list, please contact your printer vendor. You
may also use the Generic PPD if you do not need any printer specific features.
6. Close the Chooser Windows.
7. Done.
6. Network Print Monitor
Preparation
The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows
95/98/Me. Please make sure that the following steps have been completed before
proceeding with installation under Windows PC.
49