Tripp Lite B004-2DUA4-K Switch User Manual


  Open as PDF
of 24
 
17
Basic Operation
Pushbutton 1 and 2 Command
Bydefault,pressingpushbuttons1and2atthesametimefortwosecondswillinitiate
Auto Scan Mode,butyoucansetittoperformanyHotkey Setting Mode command that
you want. The Restore Default Settings, Disable Port Switching Hotkeys,andFirmware
Upgrade Modecommandscannotbeused.TosetthePushbutton 1 and 2 Command,
do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Pressandreleasethe[C]key
3. Performthecommandthatyouwishtoset.(e.g.Pressandreleasethe[W]keytoset
the Pushbutton 1 and 2 Command to turn Mouse Port Switching Functionality on/off.
To return the Pushbutton 1 and 2 Commandtoitsdefault,pressandreleasethe[A]key
in step 3.
Pushbutton 3 and 4 Command
Bydefault,pressingpushbuttons3and4atthesametimefortwosecondswillperform
a USB Keyboard/Mouse Reset,butyoucansetittoperformanyHotkey Setting Mode
command that you want. The Restore Default Settings, Disable Port Switching Hotkeys,
and Firmware Upgrade Modecommandscannotbeused.TosetthePushbutton 3 and 4
Command,dothefollowing.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Pressandreleasethe[C]key,andthenpressandreleasethe[2]key
3. Performthecommandthatyouwishtoset.(e.g.Pressandreleasethe[W]keytoset
the Pushbutton 3 and 4 Command to turn Mouse Port Switching Functionalityon/off.)
To return the Pushbutton 3 and 4 Commandtoitsdefault,pressandreleasethe[F5]
keyinstep3.
13-09-063-933242-EN.indd 17 9/10/2013 4:45:02 PM
 previous next