Tripp Lite B004-2DUA4-K Switch User Manual


  Open as PDF
of 24
 
8
Installation
Standard Installation
RefertothefollowingstepsanddiagramtosetupyourKVMswitchinstallation.
Notes:
1. Before making any connections, make sure that power to all devices being connected to the KVM switch is
turned off. Unplug the power cords of any computers that have the Keyboard Power On function.
2. The diagram below shows the B004-2DUA4-K installation. Installation for the B004-2DUA2-K is the same
except there are fewer ports.
1 2 4
4 4
4
10
5
5
3
1
ConnectamonitortotheDVIconsoleAportonthebackpaneloftheKVMswitch.
2
ConnectamonitortotheDVIconsoleBportonthebackpaneloftheKVMswitch.
3
ConnectaUSBkeyboardandmousetothecorrespondingUSBkeyboardand
mouseconsoleportsonthebackoftheKVMswitch.
4
Optional – Connectyourmicrophoneandspeakerstothecorresponding3.5mm
MiniStereoconsolejacksonthefrontpanelorthebackpanel.Thejacksonthe
frontpaneloftheunitwilltakepriorityoverthoseonthebackpanel.
5
Optional – ConnectyourUSBdevice(s)totheUSB2.0hubport(s)onthefrontand
backoftheKVMswitch.
6
ConnecttheendoftheKVMCableKitthatincludestheUSBTypeBMaleconnector
toanavailablesetofcomputerportsonthebackpaneloftheunit.Connectthe
DVIconnectortotheDVIAport,andtheUSBand3.5mmconnectorstothe
correspondingUSBand3.5mmports.
7
ConnecttheotherendoftheKVMCableKittothecorrespondingportsonthe
computer you wish to add to the installation. Note:TheB004-2DUA2-Kand
B004-2DUA4-Kcomewith6ft.CableKits.Ifyouneedalongercable,youwill
havetopurchaseaseparateP759-SeriesDVI/USB+AudioKVMCableKitofthe
appropriate length.
86 7
13-09-063-933242-EN.indd 8 9/10/2013 4:45:01 PM
 previous next