Filter
Top Products
19
The Windows Client
Hotkeys
The Hotkey Setup Screen:
Various configuration changes related to the keyboard, video, and mouse can be performed via
hotkey combinations. The Hotkey setup utility is accessed by clicking the Keyboard icon on
the OSD Control Panel. The actions performed by the Hotkeys are listed in the left column; the
keys that invoke the actions are shown in the column to the right.
An explanation of the actions is given in the table, below:
Action Explanation
Exit Remote Location Break the connection to the B014-000 and return to local operation.
Adjust Video Bring up the video adjustment utility.
Toggle OSD Toggles the OSD display Off and On.
Toggle Mouse If you find the display of the two mouse pointers (local and remote)
Display to be confusing or annoying, you can use this function to shrink the non-
functioning pointer down to a barely-noticeable tiny circle - which can be
ignored. Since this function is a toggle - use the hotkeys again to bring the
mouse display back to its original configuration.
Adjust Mouse Synchronizes the local and remote mouse movements following a video
resolution change. Upon invoking this utility, click the local mouse pointer on
top of the remote mouse pointer.
Substitute Alt Key All keyboard inputs are captured and sent to the B014-000 except for [Alt +
Tab] and [Ctrl + Alt + Del]. These work on your local computer. For these
functions to work on a remote system, a function key must be substituted for
the Alt key. If you decide to substitute the F12 key, you would use [F12 + Tab]
and [Ctrl + F12 + Del].
Note: To invoke an action, you must press and release the keys one key at a time - do not chord
the keys.
200507185 93-2464 B014-000 OM.qxd 3/27/2006 10:23 AM Page 19