Tripp Lite B020-008 Switch User Manual


 
Optional Rack Mounting
If there is not enough clearance for the unit to slide into the
rack
when the rear flanges face outward
, the problem can be
resolved with the following procedure:
1) Unscrew the rear mounting brackets
from the chassis.
2)Turn the brackets so that the flanges face inward; then
screw them back into the chassis.
Note: Be sure to leave a 13 mm gap between the flange and the rear of the
chassis in order to have enough room to screw the tab to the flange (see
step 4).
3) Slide the unit into the rack.
4)Screw the metal tabs to the rear flanges.
5) Secure the unit to the rack with the front flanges and
rear tabs.
Appendix E
FCC Radio/TV Interference Notice
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense. The user must use shielded cables and connectors with this product. Any changes or
modifications to this product not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
The policy of TRIPP LITE is one of continuous improvement. Specifications are subject to change without notice.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
This product is designed and engineered in the USA.
1111 W. 35th Street • Chicago, IL 60609 • (773) 869-1234 • www.tripplite.com
200506056 93-2463
200506056 93-2463 Console KVM OM.qxd 6/29/2005 12:30 PM Page 28