Tripp Lite B020-008 Switch User Manual


 
4
System Requirements
Computer
• A VGA, SVGA or Multisync card.
Note: On the B020-016 and B020-008, since the integrated LCD monitor’s maximum resolution is 1024 × 768, the computer’s resolution
setting must not exceed 1024 × 768. The B020-016-17 and B020-008-17 have a maximum resolution of 1280 x 1024, so the computer's
resolution setting must not exceed 1280 x 1024.
• A 6-pin mini-DIN (PS/2 style) mouse port or USB Port.*
• Either
1. a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and ground on pin 3
2. a 5-pin DIN (AT Style) keyboard port with +5V DC on pin 5 and ground on pin 4.*
3. a USB port*
* See the note under Cables in the next section.
Console (for B022-016 only):
• A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any
system in the installation.
• A PS/2 style mouse
• A PS/2 style keyboard
Cables:
This KVM switch requires the following custom-wired premium cables:
Note: 1. The KVM Switches do not support serial mice. Using a Serial-to-PS/2 adapter will not work.
2. If your computer has an AT-style keyboard socket, use a PS/2-to-AT keyboard adapter (Tripp Lite #P106-000) to enable the
keyboard to plug the keyboard cable into the computer’s keyboard port.
Function Tripp Lite Part
To Connect a PS/2 Computer to the KVM P774-006 6' Cable
P774-010 10' Cable
P774-015 15' Cable
To Connect a USB Computer to the KVM P776-006 6' Cable
P776-010 10' Cable
USB Adapter (connects a USB system to the B015-000
P774 series KVM cable)
Daisy-Chain Cables P772-002 2' Cable
P772-006 6' Cable
200506056 93-2463 Console KVM OM.qxd 6/29/2005 12:30 PM Page 4