Filter
Top Products
Security Printing Solutions Quick-Start Guide
Document #50-70430-001 Rev. B Page 1 of 11
Product Installation Instructions
(For use with TROY MICR / IRD 3005 Security Printing Solutions)
Introduction
Your TROY Security Printing Solution offers value-added functionality and the flexibility to integrate smoothly
with your check-printing system. Use the TROY Security Printing Solutions CD to install the necessary
Hewlett-Packard LaserJet printer drivers and TROY support files. To ensure successful software installation,
perform the following steps in sequential order. The documentation and installation files contained on the
TROY Security Printing Solutions CD will be needed in the event that your TROY Security Printing Solution is
reinstalled in a new location or after service has been performed. In order to best install and setup your new
TROY product, use this Quick-Start Guide and the Hewlett-Packard Getting Started Guide.
Package Contents
• TROY Security Printing Solutions CD
• TROY Security Printing Solutions Information Sheet
• TROY Software License Agreement
• TROY MICR Document Template
• TROY Security Printing Solutions User’s Guide (provided in PDF format on the CD)
• TROY MICR Basics Handbook (provided in PDF format on the CD)
• TROY Security Printing Solutions Quick-Start Guide (this document)
IMPORTANT
: If you purchased a TROY Font Memory Card Kit, please refer to the TROY Font Card
Installation Guide provided with the TROY product to install the font card into your
Hewlett-Packard LaserJet printer before
proceeding with these setup instructions. After
the font card has been installed in your printer, proceed to Step 2 in this document to install
the required TROY support files. In addition, a MICR toner cartridge must also be installed
in your HP printer to print MICR documents using the TROY Font Card Solution.
STEP 1: Unpack / Setup the TROY Security Printing Solutions Printer
1. Follow ONLY the unpacking and setup procedures described in the Hewlett-Packard Getting Started
Guide (supplied in this startup package for TROY Security Printing Solutions printers only), and then
proceed to step #2 to install the appropriate PCL 5e printer driver provided on the TROY Security
Printing Solutions CD. Do NOT
use the Hewlett-Packard CD to install the printer software for this
installation process.
2. Be sure to install the TROY MICR toner cartridge (supplied with TROY Security Printing Solutions
printers only) in the same manner as described for the standard toner cartridge. The TROY MICR toner
cartridge must
be installed in your TROY printer or Hewlett-Packard printer to print MICR documents.
READ ME FIRST