Filter
Top Products
48 Chapter 2: Setting Up
2.5.1 Installing the Server in a Rack (with Rail kit A)
Follow these instructions to mount the GT14 into an industry
standard 19" rack.
NOTE: Before mounting the Transport GT14 in a rack, ensure
that all internal components have been installed and that the
unit has been fully tested. Maintenance can be performed on
the unit while in a rack but it is preferable to install the device
in a fully operational condition.
Installing the Inner Rails to Chassis
1. Screw the mounting ear to each side of GT14 as shown
using 2 screws from the supplied mounting ear kit.
2. Press the latch and draw out the inner rails from rail
assembly.
(Rail kit A)