Filter
Top Products
85
Appendix IV: Installing the M2061 Riser Card
The following provides you with the information on installing
the optional M2061 riser card into your GT14 chassis. You
need to purchase the M2061riser card and addtional cable.
The cable connectors are illustrated as below.
1. Connect the small 4-pin connector (A) of the power
adapter cable (CCBL-046F) to the M2061 riser card as
shown.
2. Connect the big 4-pin power connector (B) to the power
connector (PW2) on the motherboard.
A: Small 4-pin connector
(Connect to the M2061)
B: Big 4-pin connector
(Connect to the Motherboard)
C: Big 4-pin connector
(Connect to the PSU cable)