Filter
Top Products
62
Phoenix – AwardBIOS CMOS Setup Utility
Boot Sequence
Set the boot priority of the system. For example in the figure
shown above, the First Boot Device is set to Floppy, the Sec-
ond Boot Device to Hard Disk and the third Boot Device to
LS120 drive.
The BIOS searches the Floppy Drive, Hard Disk and the
LS120 drive in that order, looking for an Operating System to
load.
Bootup NumLock Status
This option, when enabled, automatically turns on your Num-
Lock key when the system is booted. This is a matter of per-
sonal taste.The choices are:
On/Off
Gate A20 Option
This feature determines how Gate A20 is used to address
memory above 1MB. When this option is set to Fast, the
motherboard chipset controls the operation of Gate A20. But
when set to Normal, a pin in the keyboard controller controls
Gate A20. Setting Gate A20 to Fast improves memory
access speed and thus, overall system speed, especially with
OS/2 and Windows.
XHard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
[Press Enter]
[Floppy]
[Hard Disk]
[LS120]
[Enabled]
Item Help
_____________________
Menu Level XX
Select Your Boot
Device Priority
↑↓←→: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults