Tyan Computer B5102 Switch User Manual


 
74
Serial ATA Port 0/1 Mode:
This item allows you to set S-ATA mode.
Primary Master / Primary Slave / Secondary
Master / Secondary Slave
Onboard Device
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
USB Controller
This option enables or disables IRQ allocation for the USB
(Universal Serial Bus) controller. Enable this if you are using
a USB device. If you disable this while using a USB device,
you may have problems running that device. However, if you
don't use any USB devices, set the option to Disabled. It will
free up an IRQ for other devices to use. The choices are:
Enabled / Disabled / 1&2 USB Port / 2&3 USB
Port / 1&3 USB Port / 1 Port / 2 Port / 3
Port
Note: This option is for the older USB 1.1
specification
USB 2.0 Controller
This option enables or disables IRQ allocation for the USB 2
(Universal Serial Bus - Specification 2.0) controller. Enable
this if you are using a USB 2 device. If you disable this while
using a USB 2 device, you may have problems running that
device. However, if you don't use any USB 2 devices, set the
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Onboard Promise Raid Ctrl
CSA LAN (Giga-LAN)
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
Item Help
_________________________
Menu Level XX
↑↓←→: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults