Filter
Top Products
55
3.5 Power
These settings allow you to configure the power options for your system.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
ACPI Sleep Mode
Resume on Time
Resume Time
Chassis Intrusion Detect
After Power Failure
[S1/S3]
[Off]
[xx:xx:xx]
[No]
[Stay Off]
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ← → Select Menu Enter Select
X Sub-Menu F10 Previous Values
ACPI Sleep Mode
This allows you to select one of the ACPI power states: S1, S2 or S3. If
selected, the corresponding power state will support.
S1/S3 / S3 / S1
Resume On Time
When enabled, this allows the system to be worked up at a specified time. This
time is specified by the Resume Time parameter.
Off / On
Resume Time
This option allows the user to specify the time when the system is to wake up.
Chassis Intrusion Detect
This feature is used to set the function: when chassis open event is detected,
BIOS will record the event.
No / Yes
After Power Failure
Specifies the mode of operation after the system recovers from a power loss.
Stay off / Last State / Power on