Filter
Top Products
http://www.tyan.com
54
3.6.6 - I/O Device Configuration Sub-Menu
You can use this screen to select options for the I/O Device Configuration
settings. Use the up and down <Arrow> keys to select an item. Use the <Plus>
and <Minus> keys to change the value of the selected option.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
Serial port A:
Base I/O address:
Interrupt:
Serial port B:
Mode:
Base I/O address:
Interrupt
Parallel port:
Base I/O address:
Interrupt:
Mode:
DMA channel:
Floppy disk controller:
Base I/O address
[Disabled]
[3F8]
[IRQ 3]
[Disabled]
[Normal]
[3F8]
[IRQ3]
[Disabled]
[378]
[IRQ5]
[Output only]
[DMA1]
[Disabled]
[Primary]
F1: Help ↑↓: Select Item -/+: Change Values F9: Setup Defaults
Esc: Exit ← →: Select Screen Enter: Select Sub-Menu
F10: Previous Values
Feature Option Description
Disabled
Serial port A
Enabled
Configure serial port A
using options.
3F8
Base I/O address
2F8
Set the base I/O address
for serial port A.
IRQ3
Interrupt
IRQ4
Set the interrupt for serial
port A.
Disabled
Serial port B
Enabled
Configure serial port B
using options.
Normal
Mode
IR
Set the mode for Serial
port B using options.
3F8
Base I/O address
2F8
Set the base I/O address
for serial port B.