Filter
Top Products
24 and 16 Port Smart Switch II – User Manual Page 10
Programming The Switch
The switch can be managed using a PC via the front panel RS232
console port and the supplied cable. When the connection between
Switch and PC is complete, turn on the PC and run a terminal
emulation program such as HyperTerminal and configure its
communication parameters to match the following default
characteristics of the console port: -
Com 1 or Com 2
Baud Rate = 9600 bps
Data Bits = 8
Parity = None
Stop Bits = 1
Flow Control = None
Figure 5. Settings the PC communication parameters
Product Number 0-1591093-x 0-1591047-x Issue 1
© Tyco Electronics 2005