Filter
Top Products
24 and 16 Port Smart Switch II – User Manual Page 14
The configurable items are shown in the table below :-
Port Selects the port to be configured
Enabled Enables and disables the selected port
Advertisement
Speed
Configures the speed of the selected port or sets
the port for auto negotiation.
Flow control Enables flow control on the selected port
Rx Bandwidth Sets the received bandwidth on the selected port
Tx Bandwidth Sets the transmitted bandwidth of the selected port
Trunk configuration
The Smart Switch II supports up to 8 trunk groups this allows for the
“virtual” combining of network ports to provide a high bandwidth link
between switches. Up to 4 ports can be combined in this way.
To access this menu select 3 from the main menu and the following
menu is displayed: -
Figure 9 Trunking
To enable trunking use the U/D keys to highlight a trunk group and
the Space bar to enable that particular trunk group.
Product Number 0-1591093-x 0-1591047-x Issue 1
© Tyco Electronics 2005