Filter
Top Products
Quick Start Guide Ultra Electronics Card Systems
Page 18 MAGICARD TURBO Color Printer
Degrees
rotated 180 degrees.
Opposing Rotation Between Sides is only
significant if interfacing to a Magicard Flip
Double-Sided printing model.
Display Popup, when selected will enable
the Magicard printer spooler that normally
is displayed on the bottom right hand side
of the PC VDU when printing.
The number of copies may be set from 1
to 255.
Colour Format / Film
Dye Film Fitted - tells the printer which
type of dye film you have installed. The
dye film supplied with your printer is five
panel UR1 dye film. Leave the default
selection at YMCKO - Resin. Note that
UR8 dye film is only valid for the Magicard
Flip Model.
Page 1 Color Format - tells the
WINDOWS Driver which dye film panels
to use on your card. For printing on the
resin black dye panel leave the default
selection at YMCK - Resin Black. For a
simple color image select YMC-Composite
Black.
Page 2 Color Format - applies only to
Magicard Flip models.
Black to YMC and K - this option when
selected will enable the printing of the
resin black panel over the top of the YMC
panels, this will enable masked barcodes
to be printed. Care should be taken to
ensure that the background colour is in
the range of 0 to 254 otherwise if the
value of 255 is used (full black) the YMC
panels will be skipped and only K will be
printed.
Black to K Only - this option when
selected will enable the printing of objects
such as lines, rectangles and graphics
providing they are in a full black value of
255, should a value of 254 or lower be
used the YMC panels would be used to
create the black. This option should NOT
be used if a coloured background is being
used on the card, as white lines may be
present around the edge of the graphics
or objects. To print objects using the resin
K panel Black to YMC and K should be
selected, this will enable a coloured
background to be used with the resin
black printed on top.
Overcoat
Page 1 - Overcoat check box can be
used to turn overcoating on and off.
Page 1 - Ultra Secure check box can be
used to turn this security feature on and
off. An Ultra Secure key must of course
be fitted if a CUSTOM feature is required.
Page 1 - Overcoat Areas/Windows can
select the options for specific areas of the
card to be overcoated, or for windows to
be left in the overcoat (up to five in each
case). Overcoating is a 2.5 micron layer of
transparent acrylic protection that is
available with some types of dye film (For
example the "O" in "YMCKO" dye film).