Filter
Top Products
CALLING & ANSWERING • 13
5. When the other TTY starts ringing, the Signal light flashes slowly
and LINE IS RINGING is displayed.
If the other TTY is busy LINE IS BUSY is displayed. Try again
later to place the call or see “Automatically Redial a Busy Number” on
page 14.
6. When the other person answers the call, his or her Greeting is
displayed on your TTY. Type a reply to continue your conversation.
7. When your conversation is over, press . The screen is blank.
You can also hold down the key and press the button.
This will hang up the call without turning off the Superprint Pro80.
Redial the Last Number
EscCtrl
On/Off
1. Make sure the Superprint Pro80
is on. The Power light should be
lit.
2. Press the button. TYPE
NAME OR NUMBER is
displayed.
Dial
TYPE NAME OR NUMBER> _
Dial
3. Press to dial the number.
REDIALING... is displayed
followed by the telephone
number.
Enter
REDIALING...5551234
Enter
4. When the other TTY starts ringing, the Signal light flashes slowly
and LINE IS RINGING is displayed.
If the other TTY is busy, LINE IS BUSY is displayed. Try again
later to place the call or see “Automatically Redial a Busy Number” on
page 14.
5. When the other person answers the call, his or her Greeting is
displayed on your TTY. Type a reply to continue your conversation.
6. When your conversation is over, press . The screen is blank.
You can also hold down the key and press the button.
This will hang up the call without turning off the Superprint Pro80.
EscCtrl
On/Off