Filter
Top Products
To listen to AM/FM/TV channels, slide the
mode selector to AM/FM. Then, press the
soft button at the top of the scanner to select
the desired source (AM for AM Broadcast,
FM1 or FM2 for FM or TV Broadcast).
Directly Selecting a Channel
Press the DIR soft key to select the
direct entry mode. Use ▲ or ▼ to scan
up or down the selected band. The
scanner stops on active channels. TV
channels are scanned after FM
channels in FM mode.
You can also enter the channel frequency using the keypad. Enter the
channel frequency (for FM or AM) or the TV channel number.
Using AM/FM/TV Channel Memory
Your scanner has 30 AM/FM
memories for quick channel recall
(10 for AM, 20 for FM/TV). To store a
channel into memory, First press the
soft key to select the desired band
(AM, FM1 or FM2). Then, directly
select the channel you want to store
(see above). While listening to the channel, press and hold the number
button that corresponds to the memory you want to save the channel into
for 2 seconds. The scanner switches to the Memory mode for the current
band.
To quickly recall a channel, select the band, select the channel memory
mode by pressing the MEM soft key, then tap the number button that
corresponds to the memory where the channel is stored.
25
Listening to AM/FM/TV Channels
Listening to AM/FM/TV Channels
DIR
MEM
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 25