Filter
Top Products
Your scanner has 300 memories you can
store frequencies into for scanning.
The memories are arranged in 10 banks of
30 memories each. While scanning, you can
quickly select which bank to scan by
pressing the number button that corresponds
to the bank you want to turn on or off for
scanning. To select the scanner mode, slide
the MODE switch to Scanner.
Programming Memories
You will first need to determine the frequencies you want to program.
This varies widely depending on what you want to listen to and your
geographic area. There are many frequency reference sources available
on the internet that can get you started. One such source,
http://www.radioreference.com, has a diverse listing of many conventional
frequencies. You might also search for regional hobbyist sites that cover
your area or check the database at the FCC’s General Menu
(http://www.fcc.gov) for frequencies of interest.
Make a list of the frequencies you want to program, then organize them in
up to 10 groups of 10 or fewer and fill out the table below. It always helps
to plan and organize what you want to do before you start, so don’t skip
this important step. (The numbers in the left-hand columns below
correspond to your scanner’s memory numbers.)
28
Using the Scanner Memories
Using the Scanner Memories
Bank 1 Bank 2 Bank 3 Bank 4 Bank 5
111 213141
212 223242
313 233343
414 243444
515 253545
616 263646
717 273747
818 283848
919 293949
10 20 30 40 50
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 28