Filter
Top Products
Many people enjoy searching for the unknown...frequencies that are in
use in their area but are not posted to any site or in any publication.
The BC370CRS has two ways to search: Limit searching that searches
between two set frequencies and Service Searching that searches for
specific types of agencies based on the FCC’s standard frequency
allocation for such services.
Using Limit Search
Programming an Upper/Lower Limit
Follow these steps to program an Upper and Lower limit for the limit
search:
1. Press SRCH soft key then HOLD. The scanner holds on the current
search frequency.
2. Enter one of the range limits, then press E/PGM.
Press ▲ or ▼, then enter the other range limit and press E/PGM.
Searching the Selected Range
After entering the limits (or use the default limits), press SRCH soft key.
The scanner starts searching from the lower range up to the higher
range. To change the direction of the search, press ▲ or ▼.
Using Service Search
You can select any of Police, Fire/EMS, Aircraft Ham, and Marine
channels for active frequencies in your area.
Selecting a Service to Search
Press SVC to enter the service search mode, then press the button
corresponding to the service you want to search. When the scanner stops
on a transmission, you can force it to resume searching by pressing
▲ or ▼.
33
Searching for Active Frequencies
Searching for Active Frequencies
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 33