Filter
Top Products
Basic Operation
Note: Fold out the Front Cover to see the Controls and
Indicators while reading this Guide.
Turn the Scanner On
Turn the
VOLUME
control clockwise out of the detent
position. bc245 flashes twice in the display. The scanner
automatically starts scanning.
Setting the Squelch
To set the squelch, you must be in the Manual mode, and
you should not be receiving a signal on your scanner.
1. Press until you do
not hear a signal.
2. Make sure that the
VOLUME is set to a
comfortable listening
level.
3. Think of the Squelch Control as a gate. Turn
SQUELCH fully counter-clockwise. This raises the
“Squelch Gate” so high that only very strong signals
can get through.
4.
Turn SQUELCH fully clockwise until you hear a hiss.
This lowers the “Squelch Gate” so that everything
gets through—noise, weak signals, and strong
signals.
14
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
NOISE
C:\Manuals\BC245 VA\BC245 VA rev.vp
Fri Nov 12 10:31:36 1999
Color profile: Disabled
Composite Default screen