Filter
Top Products
Moving between Scan List Memories
There are a number of ways to step and move through
your Scan List memories:
1. Press repeatedly.
2. Or, Press , then press or .
3. Or, Press , Next press 0-9 (scan list number), then
press 0-9 (memory position). For example. To move to
Scan List 4, memory position 10, press:
,4,0,
Multi-Track
The BC 245XLT allows you to track more than one system
at a time. Here are some highlights of this new feature:
1.You can actually track up to 10 trunking systems at
one time!
2.You can trunk scan or search and scan conventional
frequencies at the same time.
3.You can program conventional frequencies in the same
bank as trunking systems. After the radio finishes checking
a trunked system for activity, it will conventionally scan the
other frequencies in the bank (remember, only trunking
frequencies are programmed in TRUNK mode).
To scan a mix of trunking and conventional banks, select
the banks you wish to be active with trunking off, then
press . The radio will instantly begin scanning. If you
have not programmed a trunking bank with talk group ID’s,
you will receive an ERROR message for that bank. You
can switch to SEARCH mode and the scanner will search
for any active ID’s on the system.
55
C:\Manuals\BC245 VA\BC245 VA rev.vp
Fri Nov 12 10:32:25 1999
Color profile: Disabled
Composite Default screen