Filter
Top Products
NTI UNIMUX MULTI-USER KVM SWITCH
2
ORDERING INFORMATION
The UNIMUX USB KVM switch is built to a specific size ranging from 2 to 8 users and 8 to 32 CPUs. The switch is built at the
factory based on the specified size ordered. The switch has USB inputs and outputs that support all platforms and are configured
with interface cables, see interface cable section. The “n” in the part number UNIMUX-nXm--U represents the number of users.
Select either 2, 4, or 8 user switches. The “m” in the part number represents the number of CPUs. The switch is available with
either 8, 16, 24, or 32 sets of CPU ports. It is not necessary to connect a user or CPU to each port (I.e. a UNIMUX-2x16-U switch
has the capability of supporting 16 CPUs, but can have only 10 CPUs connected and 6 empty ports.
UNIMUX-nXm-U
Replace the “n” with either 2, 4, or 8
Replace the “m” with either 8, 16, 24, or 32
The following list represents the available sizes that can be ordered:
UNIMUX-2X8-U UNIMUX-4X8-U UNIMUX-8X8-U
UNIMUX-2X8-UDT UNIMUX-4X8-UDT UNIMUX-8X16-U
UNIMUX-2X16-U UNIMUX-4X16-U UNIMUX-8X24-U
UNIMUX-2X32-U UNIMUX-4X32-U UNIMUX-8X32-U
MATERIALS
Materials Supplied:
• NTI UNIMUX-nXm-U Multi-user USB KVM Switch
• IEC Power cord- country specific
• 4-#10-32 x 3/4" pan head screws and #10-32 cage nuts (server cabinet mounting hardware)
• CD with pdf file of this manual and RS232 control software
Materials Not Supplied, but REQUIRED
• USBVEXT-xx-MM cable for each CPU being connected to the switch
Where:
xx is the length of the cable in feet (3,6,10, or 15 feet available)
MM indicates male-to-male connector
Cables can be purchased from Network Technologies Inc by calling 800-RGB-TECH (800-742-8324) or 330-562-7070
or by visiting our website at www.networktechinc.com
.
See page 39 for some of the available cables
.