VBrick Systems VBrick v4.2.3 Network Card User Manual


 
Reinstalling the Software
VOD-W Admin Guide 53
34. In the Content Import Location field click Browse and navigate to E:\StagingArea.
35. Highlight the first demo file and in the
Content Title field enter the title that will be seen
by users in the format:
/Demo/< Name of Demo file >
36. Click Start. When done repeat these steps for the other six files.
Reinstalling the Dongle Driver
The license file corresponding to maximum streams and bandwidth you purchased is pre-
installed on the server by VBrick. Under normal circumstances you will never have to re-
install the license. When you purchase a VOD-W, a dongle key with the proper settings is also
included. This dongle key must be connected to any available USB port (front or rear) on the
unit to enable video streaming through the server. The license dongle regulates the maximum
video streaming throughput and the maximum number of simultaneous video streams. The
license file is pre-installed on the VOD-W server in the
\system32 folder. However, you will
still need to reinstall the dongle driver if you ever need to reinstall the system.
Installing the Dongle Driver
T To load the license with the dongle
1. Attach the dongle key to any available USB port and click
Continue to run the Found New
Hardware Wizard
.
2. Go to
Start > Control Panel > InfoValue QuickVideo.
3. Click on the
License tab and click the Load License File button.
4. After loading a valid license, click on
Load Dongle Driver. This will load the dongle driver,
restart the service, and load the new license.