Filter
Top Products
80 © 2008 VBrick Systems, Inc.
31. In the Completing the New Volume Wizard window select Finish.
32. Repeat steps 26–31 for drives H and I if necessary. If there is more than one disk
enclosure, repeat for drives J through O (as many as present).
33. Open Windows Explorer.
34. Select G drive and create
Content2 by right-clicking and selecting New > Folder. Then
create
Content3 on the H: drive and Content4 on the I: drive if necessary. If there is more
than one disk enclosure, repeat for drives J through O as necessary.
35. Go to
Control Panel > InfoValue QuickVideo.