Filter
Top Products
Controls and Functions
2-6 Vidikron Vision Model 90 Owner’s Operating Manual
Input Selection Buttons: Use these buttons to select an input source directly or to enter
numeric characters, as follows.
12. VIDEO (1)
Press to select Composite video input as the source.
13. S-VID 1 (2)/ S-VID 2 (5) (S-Video)
Press to select an S-Video input.
14. COMP (Component) (3)
Press to select Component SD (480i/576i) video input as the source.
15. HD 1 (4) / HD 2 (7)
Press to select a HD (RGBHV or YPbPr component) input.
16. DVI 1 (6) / DVI 2 (8)
Press to select a Digital Video input.
Aspect Ratio Selection Buttons: Use these buttons to select an aspect ratio directly or to
enter numeric characters, as follows.
17. ANA (Anamorphic) (9)
For 16:9 DVDs.
18. 4X3 (Standard 4:3) (0)
The input signal is scaled to fit 4:3 display mode in the center of the screen.
19. LETBOX (Letterbox)
Image in letterbox format is enlarged to fit 16:9 full screen display and the upper/ lower
portions are “blanked off.”
20. I-WIDE (IntelliWide)
A 4:3 image is enlarged NON-linearly in horizontal direction to fit 16:9 full screen display.
21. CINEMA
The image in the Letterbox mode is enlarged to a 16x9 image and the upper and lower portions
are compressed.
22. SVC
Reserved for future use.