Filter
Top Products
Operation
4-14 Vidikron Vision Model 90 Owner’s Operating Manual
Triggers: Select Triggers from the Service menu to configure the 12-volt trigger outputs. You
can assign one or more trigger outputs to each aspect ratio. Those triggers are then activated
by selecting that aspect ratio.
Miscellaneous: Select Miscellaneous from the Service menu to set the following options:
•Menu Mode: This is the manner in which the OSD menus appear and disappear when you
press MENU. Choose one of the following:
0 = No transition; menus abruptly appear and disappear.
1 = Menus fade in and out.
2 = “Checkerboard” dissolve; menus appear and disappear in sections.
3 = “Window shade” effect; menus are drawn on a diagonal from top left to bottom right,
and retract in the opposite direction.
• Timeout - Short/Long: These settings control how long the OSD menus stay on screen.
Select a time-out period of from 2 to 60 seconds.
• Side Bar Color: This controls the color of the inactive image area. The range is from -100
(black) to 100 (white).
The inactive image area is on either side of the active image area when using the Standard
4:3 aspect ratio, and above and below the active image area when using the Letterbox
aspect ratio.
System Reset: To reset ALL projector settings (including image settings) back to their factory
defaults, choose System Reset from the Service menu. Select Confirm to continue or Back to
cancel. This action is not undoable. Use it with caution!