Filter
Top Products
Installation
3-2 Vidikron Vision Model 90 Owner’s Operating Manual
3.2
Quick Setup
Table 3-1 gives a quick overview of the Vision 90 installation process. The sections following
this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details,
Refer to page...
1 Choose a location for the projector 3-3
2 Connect signal sources to the projector 3-10
3 Connect external controller to RS-232 port (optional) 3-14
4 Connect other home theater components to 12-volt trigger
outputs (optional)
3-14
5 Apply power to the projector 3-14, 4-1
6 For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
4-1
7 Lens adjustments: projected image size (zoom), position
(shift) and focus
3-7, 4-2
8 Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
4-4 through 4-10
Note