Filter
Top Products
78
OSD (On Screen Display) Controls
» Signal Info. Menu
Checking the frequencies, polarities of input signals, and
resolution
Use this function to check the frequencies and polarities of the
signals currently being input from a computer, etc.
Press the MENU button on the remote control to display the
MAIN MENU on the screen, then...
1. Use the and buttons to select “SIGNAL INFO.”, then press
the MENU button.
2. The “SIGNAL INFO” is displayed.
3. Once you have checked the frequency ...
Press the EXIT button to return to the main menu. To delete the
main menu, press the EXIT button once more.
Information
■ Video standard formats
Different countries use different formats for video signals. Set to the
video standard used in your current country.
AUTO ........... The video standards are automatically identied and
the format is set accordingly.
PAL ............... This is the standard format used mainly in the United
Kingdom and Germany.
SECAM ........ This is the standard format used mainly in France and
Russia.
4.43 NTSC,
PAL60 ........... This format is used for videos in countries using PAL
and SECAM video signals.
3.58 NTSC .... This is the standard format used mainly in the United
States and Japan.
PAL-M .......... This is the standard format used mainly in Brazil.
PAL-N ........... This is the standard format used mainly in Argentina.
H. FREQ : 48.4 KHz
V.
FREQ : 60.0 KHz
H. POLARITY : NEG.
V.
POLARITY : NEG.
MEMORY : 24
RESOLUTION : 1366x768
SIGNAL INFO.
SEL. ADJ. EXIT
EXIT