Filter
Top Products
Setting Driver Properties
22 ViewCast
The Video Decoder tab has the following controls.
Video Standard
Select the video standard
Signal Detected
When the card does not detect the input signal, this field displays a 0.
When the card detects the input signal, it displays 1.
Lines detected
This field displays the number of lines the card detects in the input
signal.
VCR Input
This field is a DirectShow feature that is not implemented.
Output Enable
This field is a DirectShow feature that is not implemented.
OK
Click OK to accept the settings.
Cancel
Click Cancel to reject the settings and close the window.
Apply
Click Apply to apply the settings.
Help
Click Help to access the user guide.
The driver treats PAL-BDGHI identically (the exceptions with PAL are PAL-M and PAL-N which are their
own beings) and the driver also treats all variations of SECAM the same.