Filter
Top Products
ViewSonic 32 PJ513D/PJ513DB
DISPLAY menu
PICTURE menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Aspect Ratio
(Auto)
There are four options to set the image's aspect ratio depending on
your input signal source.
See "Selecting the aspect ratio" on page 21 for details.
Keystone
(0)
Corrects any keystoning of the image. See "Correcting keystone" on
page 20 for details.
Position
(0)
Displays the position adjustment page. To move the projected
image, use the directional arrow buttons. The values shown on the
lower position of the page change with every button press you made
until they reach their maximum or minimum.
Phase
(depends on the
selected input
source)
Adjusts the clock phase to reduce image
distortion.
H. Size
(depends on the
selected input
source)
Adjusts the horizontal width of the image.
Digital Zoom
(100%)
Magnifies or reduces the projected image. See "Magnifying and
searching for details on the projected picture" on page 20 for details.
FUNCTION
(default setting /
value)
DESCRIPTION
Preset Mode
(PC: Brightest;
YPbPr/ S-Video/
Video:
Standard)
Pre-defined preset modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
preset mode" on page 22 for details.
Reference
Mode
Selects an preset mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User 1/User 2 mode" on page 23
for details.
Brightness
Adjusts the brightness of the image.
See "Adjusting Brightness" on page 23 for details.