Filter
Top Products
36
Network Restart
If you encounter a malfunction of network connection and need to restart the network
settings, you can go into the Setting > LAN Control Setting > Network Restart
menu to restart network function.
Option
Closed Caption
Enable or disable closed captions by selecting CC1 (closed caption1, the most
common channel), CC2, CC3, CC4, T1, T2 or OFF.
Password
Set, change or delete the password. When the password function is added, image
projection will require to input the preset password when turning on the projector.
Presentation Timer
Remind the presenter to finish the presentation within a certain time frame.
High Altitude
Use this function to allow the fans operates at full speed continuously to achieve
proper high altitude cooling of the projector.
Lamp Setting
Allow you to enter the Lamp Setting menu.
• Lamp Hours: Display the lamp’s elapsed operating time (in hours).
• Lamp Hours Reset: Reset the lamp Hour to 0 hours.
• Eco Mode: Use this function to dim the projector lamp light output which will lower
power consumption and increase lamp life.
• Dynamic Eco Timer (RC): Sets the timer of triggering Dynamic Eco function. The
projector lamp will start dimming when the timer period has finished.
My Button
Allow user to define a short cut key on the remote control, and the function item is
selected in OSD menu.
Pattern
The projector can display several test patterns. It helps you adjust the image size and
focus and check that the projected image is free from distortion.
CEC
If the projector is connected to a DVD player with HDMI cable, selecting On will
activate the DVD player at a time when powering on the projector.
Factory Default
Restore settings to factory default.
Note
• The following settings will still remain: Keystone, Password, Projector Projection, High
Altitude and Language.