1
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
• Single chip 0.55" Texas Instruments DLP
®
technology
• PJD6345: XGA (1024x768 pixel)
• Single chip 0.65" Texas Instruments DLP
®
technology
• PJD6544w: WXGA (1280x800 pixel)
• Compatibility with Macintosh
®
computers
• Compatibility with NTSC, PAL, SECAM and HDTV
• D-Sub 15-pin terminal for analog video connectivity
• User-friendly, multi-language on-screen display
• Advanced electronic keystone correction
• RS-232 connector for serial control
• HDMI 1.4a support
• PJLink
TM
compatible
• Support remote control with Crestron software
• LAN display 4-1 (maximum 4 PC/ NB / smart phone / smart Pad display to 1
projector)
• USB display supports computer connection via USB mini-B type to A type cable
• Support USB flash drive for Photo / Video / music playback and office viewer
function
• DynamicEco Timer function decreasing the power consumption of the lamp by up to
70% when no input signal can be detected for a set period of time.
• Selectable quick power off function
• Switchable normal and economic modes to reduce the power consumption
• Support 3D DLP link technology
• Less then 0.5w power consumption in standby mode.
Note
• The information in this manual is subject to change without notices.
• The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.
• The apparent brightness of the projected image will vary depending on the ambient
lighting conditions, selected input signal contrast/brightness settings, and is directly
proportional to projection distance.
• The lamp brightness will decline over time and may vary within the lamp manufacturers
specifications. This is normal and expected behavior.