Filter
Top Products
24
How to operate
1. Press
MENU
on the projector or
Menu
on the remote control to open the OSD menu.
2. When OSD is displayed, use
/
to select any feature in the main menu.
3. After selecting the desired main menu item, press
to select feature setting.
4. Use
/
to select the desired item and adjust the settings with
/
.
5. Press
MENU
on the projector or
Menu
on the remote control, the screen will return to
the main menu.
6. To exit OSD, press
MENU
on the projector or
Menu
on the remote control
again. The
OSD menu will close and the projector will automatically save the new settings.
Picture
Color Mode
There are many factory presets optimized for various types of images.
• Brightest:For the brightest environment.
• Standard:For computer or notebook.
• Theater :For home theater.
• Dark Room:For dark environment.
• DICOM SIM: Recommended for DICOM format files in simulation mode.
• User 1:Memorize user 1 defined settings.
• User 2:Memorize user 2 defined settings.
Note
•
DCIM SIM option is only for training or reference. It not used for actual diagnosis.
• DICOM represents for the Digital Imaging and Communications in Medicine. This is a
standard created by the American College of Radiology and the National Electrical
Manufacturers Association. This standard specifies the method of digital image data to
be transferred from one system to another.
Brightness
Brighten or darken the image.
Contrast
Set the difference between light and dark areas.
Video Setting
Allow you to enter the Video Setting menu.
• Saturation: Adjust a video image from black and white to fully saturated color.
• Sharpness: Sharpen or soften the image.
•Tint: Shift colors toward red or green.
Color Setting
Adjust the color temperature. At higher temperature the screen looks colder; at lower
temperature, the screen looks warmer. If you select “User”, then you can change the
intensity of each of 3 color (Red, Green, Blue) to customize user color temperature.
User Color