Filter
Top Products
27
•
On: The projector will turn on in 3 seconds.
•
Off: The projector will turn on following normal power on procedure.
Quick Power Off
•
On: The projector will directly shut down without cooling procedure.
•
Off: The projector will shut down following normal cooling procedure.
DC 12V Trigger
1. When Green Mode is off and the projector is under standby mode, you can enable
or disable to trigger external devices such as anelectric screen.
2. When Green Mode is on and the projector is under standby mode, DC 12V will not
trigger the screen no matter you set to on or off.
3. When the projector is under normal projection, DC 12V will always trigger the
screen no matter you set to on or off.
Option
Password
Set or delete the password. When the password function is added, image projection
will require to input the preset password when turning on the projector.
Blank Screen
Blank the screen temporarily, and select the screen color when this function is active.
OSD Setting
Allow you to enter the OSD Setting menu.
• Menu Position: Choose the menu location on the display screen.
• OSD Timeout: Duration of OSD menu display countly starts (at idle state by
second).
• OSD Transparency: Select to change the transparency level of the OSD
background.
Closed Caption
Enable or disable closed captions by selecting CC1 (closed caption1, the most
common channel), CC2, CC3, CC4, T1, T2,T3, T4 or OFF.
Others
Allow you to enter the Others menu.
• Message: Enable or disable the message box at the right bottom of the screen.
• Zoom: Zoom in and out the images.
• DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio by
darkening the black scenes. Disable DCR will resume to normal contrast
performance. DCR will impact lamp life and system noise performance.
• Test Pattern: Display embedded test pattern.
Function
Allow user to define a short cut key on the remote control, and the function item is
selected in OSD menu.
Display Type
Allow user to select PIP (Picture in Picture) screen, POP (Picture on Picture) screen
or disable PIP/POP function.