Filter
Top Products
7ViewSonic PJ656
Setting up
Setting up
WARNING ►Place the projector in a stable position horizontally. A fall
or a turnover could cause an injury and/or damage to the projector. Using a
damaged projector could result in a fire and/or an electric shock
.
• Do not place the projector on an unstable, slant or vibrant surface such as a
wobbly or inclined stand.
• Do not place the projector in the side/front/rear-up position, except cleaning
the air filter.
►Place the projector in a cool and well ventilated location. The high
temperature of the projector could cause a fire, a burn and/or malfunction to the
projector.
• Do not stop up, block and cover the projector's vents.
• Keep a space of 30 cm or more between the sides and other objects such as
walls.
• Do not place the projector on metallic objects or anything that conducts heat.
• Do not place the projector on a carpet, cushion or bedding.
• Do not place the projector in direct sunlight or near a hot object such as a
heater.
• Do not place objects near the lens and vents of the projector. Do not place
objects on the projector.
• Put nothing that is sucked or sticks to the bottom of projector. This projector
has some intake vents also on the bottom.
►Do not place the projector on wet surfaces. Wetting the projector or inserting
liquid into the projector could cause a fire, an electric shock and/or malfunction
to the projector.
• Do not place the projector in a bathroom or the outdoors.
• Put nothing containing the liquid near the projector.
CAUTION ►Avoid a smoky, humid or dusty place. Placing the projector
in such place could cause a fire, an electric shock and/or malfunction to the
projector.
• Do not place the projector near a humidifier, a smoking space or a kitchen.
►Adjust the direction of the projector to keep the light from directly hitting the
projector's remote sensor.