Filter
Top Products
29ViewSonic PJ656
Multifunctional settings
Item Description
PROGRESSIVE
Using the buttons ▲/▼ switches the progress mode.
TV
FILM
TURN OFF
• This function is performed only for an interlaced signal of a VIDEO
input, an S-VIDEO input or CONPONENT VODEO input of 525i
(480i) or 625i (576i) signal.
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select TURN OFF,
even though the screen image may lose the sharpness.
MY MEMORY
Selecting a mode of MY MEMORY using the buttons ▲/▼ and then
pressing the button ► or the ENTER button performs each function.
LOAD1
LOAD2
LOAD3
LOAD4
SAVE4
SAVE3
SAVE2
SAVE1
This projector has 4 numbered memories for adjustment data.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on
the memory whose number corresponds to the command’s number,
and adjusts the picture automatically depending on the data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current
adjustment data on the memory whose number corresponds to the
command’s number.
• The current adjustment data of the items in the PICTURE menu is
stored, except for the adjustment data in the CUSTOM modes for
the GAMMA and COLOR TEMP items.
• There may be some noise and/or the screen may flicker for a
moment when data is loaded to memory. This is not a malfunction.
PICTURE Menu (continued)