Filter
Top Products
24
ViewSonic PJ862
Multifunctional settings
EASY Menu
Item
Description
ASPECT
Using the buttons ◄/► switches the mode for aspect ratio.
See the item ASPECT of section IMAGE menu
(
29
)
.
MODE
Using the buttons ◄/► switches the mode
of picture type. The
modes of picture type are combinations of a mode of GAMMA
and
a mode of COLOR TEMP
.
Choose a suitable mode according to the
projected source.
NORMAL
CINEMA
DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
•
When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
MODE is “CUSTOM”. Please refer to the items GAMMA
(
26
)
and
COLOR TEMP
(
27
)
of PICTURE menu.
•
Wh
en this function is performed, a certain extra such as a line
may appear
.
BRIGHT
Using the buttons ◄/►
adjusts the brightness.
See the item
BRIGHT
of section
PICTURE
menu
(
26
).
CONTRAST
Using the buttons ◄/► adjusts the contrast.
See the item
CONTRAST
of section
PICTURE
menu
(
26
).
COLOR
Using the buttons ◄/► adjusts the strength of whole color.
See the item
COLOR
of section
PICTURE
menu
(
27
).
TINT
Using the buttons ◄/► adjusts the tint.
See the item
TINT
of section
PICTURE
menu
(
27
).
SHRPNESS
Using the buttons ◄/► adjusts the sharpness.
See the item
SHARPNESS
of section
PICTURE
menu
(
27
).
WHISPER
Using the buttons ◄/► turns off/on the whisper mode.
See the item
WHISPER
of section
SETUP
menu
(
34
)
.
With the EASY MENU, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
EASY MENU
CONTRAST
ASPECT 4:3
BRIGHT
MODE NORMAL
COLOR
+0
+0
+0
TINT
+0
SHARPNESS
+3
WHISPER NORMAL
RESET
FILTER TIME 0
LANGUAGE ENGLISH
Go To Advance Menu...
MIRROR NORMAL