Filter
Top Products
31
ViewSonic PJ862
Multifunctional settings
VIDEO Qlty. Menu
With the VIDEO Qlty. menu, items shown in the table below
can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item
Description
PRO
GRESSIVE
Using the buttons ▲/▼ switches the
progressive mode.
TV
FILM
TURN OFF
•
This function performs only at an interlaced signal of a VIDEO
input, a S-VIDEO input or a COMPONENT VIDEO input of 525i
(480i)
or 625i (576i)
signal.
•
When the TV or FILM is selected, the screen image will be crisper.
The FILM mode is adaptable to the 2-3 Pull-Down system to the
conversion.
Bu
t these may cause a certain defect (for example,
jagged line) of the picture at a quick moving object. In such a case,
please select the TURN OFF, even though the screen image may
lose the crisp.
3D-YCS
Using the buttons ▲/▼ switches
the
3D-YCS mode
.
STILL IMAGE
NORMAL
TURN OFF
•
This function performs only at a VIDEO input of NTSC 3.58.
•
NORMAL is the mode for images with a lot of motions like movies,
and STILL IMAGE is the mode for images with few motions or
completely still ones like slides.
•
When this function performs, the VIDEO NR function is ineffective.
VIDEO NR
Using the buttons ▲/▼ switches
the noise reduction mode
.
HIGH
MIDDLE
LO
W
•
This function performs only at a VIDEO input or a S-VIDEO input.
At a VIDEO input of NTSC 3.58, this function performs only when
the TURN OFF is selected under the 3D-YCS.
•
When the HIGH, the MIDDLE or the LOW is selected, the noise
on screen is reduced according to each mode.
•
When this function is excessive, it may cause a certain
degradation of the picture.
MENU [RGB]
IMAGE
PICTURE
:SELECT
SETUP
INPUT
OPTION
EASY MENU
SCREEN
VIDEO Qlty.
NETWORK
PROGRESSIVE TURN OFF
3D‑YCS TURN OFF
VIDEO NR LOW