ViewSonic PJ862 Projector User Manual


 
54
ViewSonic PJ862
Warranty And After-Service
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and run
through the suggested checks. If this does not resolve the problem, please contact your
dealer or the service company. They will tell you what warranty condition is applied.
Specifications
Specifications
NOTE • This specifications are subject to change without notice.
Item Specification
Product name Liquid crystal projector
Liquid
Crystal
panel
Panel size 2.0 cm (0.79 type)
Drive system TFT active matrix
Pixels 786,432 pixels (1024 horizontal x 768 vertical)
Lens Zoom lens F=1.7 ~ 2.1 f=24.4 ~ 2.93 mm
Lamp 230W UHB
Speaker 3W x 4
Power Supply AC100-120V/4.0A, AC220-240V/2.0A
Power Consumption 370W
Temperature range
5 ~ 35°C (Operating)
Size
336 (W) x 95 (H) x 265 (D) mm
(Not including protruding parts)
• Please refer to the following figure.
Weight (mass)
3.9 kg
Ports
Optional
parts
Lamp RLC-003
Air filter and
the others
Please consult your dealer or ViewSonic for part information.
DIGITAL RGB input:
DVI-D ................................... 1
RGB input:
RGB IN1 ..D-sub 15pin mini x1
RGB IN2 ..D-sub 15pin mini x1
RGB output:
RGB OUT D-sub 15pin mini x1
Audio input:
AUDIO IN ........ Stereo mini x1
AUDIO IN L/R ............ RCA x2
Audio output:
AUDIO OUT ...
Stereo mini x1
Video input:
COMPONENT VIDEO
(Y,
C
B
/P
B,
C
R
/P
R
) ...... RCA x3
S-Video ................................
1
Video ....................................
1
Communication port:
CONTROL ............D-sub 9pin x1
USB ....................... USB(B) x1
LAN ........................... RJ45 x1
Other port:
WIRED REMOTE ............... x1
DC OUT ...............................x1