5
ViewSonic VG181
E
N
G
L
I
S
H
Important Safety Instructions
1 Read these instructions thoroughly.
2 Follow all warnings and instructions marked on this product.
3 Unplug the product from the wall outlet before cleaning. See the
Cleaning the
ViewPanel
section in this guide.
4 Do not use the product near water. Never spill liquid of any kind on the product.
5 Do not place the product on an unstable cart, stand, or table. Doing so may cause the
product to fall, which can seriously damage it.
6 Slots and openings in the cabinet are provided for ventilation. To ensure reliable
operation, never block these ventilation slots by placing the product on a bed, sofa,
rug, or similar surface. This product should never be placed near or over a radiator or
heat register; or installed in any enclosure that prevents proper ventilation.
7 Make sure the power source complies with the power recommendation printed on the
back of the product. If you are not sure of the type of power provided by the wall
socket, consult your dealer or local power company.
8 Do not place any object on the power cord. Do not place this product where people
could walk on the power cord.
9 If you use an extension cord with this product, make sure the total ampere rating of the
product(s) plugged into the extension cord does not exceed the ampere rating of the
extension cord.
10 Never push objects of any kind through the ventilation slots at the back of the
product. To do so could risk fire or electric shock.
11 Do not attempt to service this product yourself. Opening or removing covers may
expose you to dangerous voltage that could cause fire or electric shock. Refer all
servicing needs to authorized service personnel.
12 Unplug this product from the wall outlet and contact authorized service personnel
under the following conditions:
a) When the power cord or plug is damaged or frayed.
b) If a liquid has been spilled into or on the product, including rain.
c) If the product does not operate normally when operating instructions are followed.
Only adjust those controls that are covered by the operating instructions, since
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal
operation.
d) If the product has been dropped or the cabinet has been damaged.
e) If the product exhibits a distinct change in performance, indicating a need for
service.
Getting Started