Filter
Top Products
STEP 2: CONNECTING THE SCANNER 9
6. Plug the power adapter into an AC (wall) outlet.
The following diagram shows the scanner connected to a computer.
The status light on the front of the scanner comes on indicating the
scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the
USB port and automatically loads the appropriate software from
the CD to run the scanner.
When the software is finished loading, the Finish button on the
dialog box on the computer screen becomes active.
Note: If your computer is running Windows XP, you may see
messages about using a fast USB 2.0 connection for the scanner. If
your computer is not equipped with USB 2.0 ports, you can just
disregard those messages.
Status light