Filter
Top Products
32 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE
CREATING NEW CONFIGURATIONS
You cannot change settings of the preset (default) configurations. If you
want to scan with settings other than those in the preset configurations,
create a new configuration. You can do this either by copying a preset
configuration and making the desired changes or by creating a new
configuration from scratch. The new configuration is saved in the Select
Configuration list so you can use it again.
To create a new configuration:
1. Open the Configuration dialog box.
2. Select the tab that corresponds to the button for which you are
creating the new configuration.
3. Scroll the applications in the Select Destination list and click an
application to associate the new configuration with.
4. Do one of the following:
■ Click the New button.
■ Select a preset configuration and click the Copy button.
5. On the New Scan Configuration dialog box, type a name for the
new configuration.
■ If you are copying from a preset configuration, leave the name as
is or change it as required.