Filter
Top Products
16 VISIONEER 9650 SCANNER USER’S GUIDE
STEP 3: CONNECT THE POWER SUPPLY
Connect the power supply and power cord, and plug the power supply
into an electrical outlet.
To connect the power supply:
1. Plug the power supply into its power port on the scanner.
Make sure the ADF cable is plugged in securely. If the cable is loose
the ADF will not function properly.
2. Plug the power cord into the power supply and into a wall outlet.
Now proceed to the next section, “Step 4: Connect the USB Cable
and Turn on the Power.”
Note: Only use the power supply (HEG42-240100-7L made by
HiTRON) included with your scanner. Connecting any other type of
power supply may damage your scanner and will void its warranty.