Filter
Top Products
138 VISIONEER 9650 SCANNER USER’S GUIDE
REPLACING THE ROLLER ASSEMBLY
After extended use, the roller may wear out and may need to be
replaced. It is a user-replaceable part and can be ordered. See the section,
“Visioneer 9650 Scanner Parts List” on page 146 for the part number.
Frequent paper jams are a symptom of a worn roller assembly. A worn
roller can cause documents to feed in skewed at an angle, or multiple
pages to feed at the same time. In both cases, paper jams may occur. A
worn roller should be replaced to avoid damage to the scanner’s internal
parts. However, before replacing the roller you should clean it first as
excessive dust on the roller will make it appear worn and smooth to the
touch. You cannot properly diagnose a worn roller until you have
cleaned it.
To replace the roller assembly:
1. Open the ADF cover.
2. The roller is located in the ADF cover.