Filter
Top Products
STEP 2: CONNECT AND POWER ON THE SCANNER 9
STEP 2: CONNECT AND POWER ON THE SCANNER
Before installing the software, connect the ADF cable, connect the
scanner to a power source, and turn the power on.
To connect the scanner and turn the power on:
1. Plug the ADF cable into the ADF port on the body of the scanner.
2.
Plug the power supply into its power port on the scanner.
Note: Only use the power supply (ADP-20LB Rev. B made by Delta
Electronics, Inc.) included with your scanner. Connecting any other
type of power supply may damage your scanner and will void its
warranty.