Filter
Top Products
Xerox DP1011 User’s Guide 17
User Controls
Adjust the Computer Image
1. Press the Menu button on the Remote Control or Panel Control
to open the OSD.
2. Select the Computer Image menu and press the Enter button.
The Computer Image menu appears.
3. Use the keys to select the item you want, and use the
keys to adjust the selected setting.
4. When the new settings are what you want, press the Menu
button again.
Auto Image—Automatically adjust the frequency, tracking, and
horizontal and vertical position. For most video sources, Auto
Image provides the best results.
Frequency—Changes the display data frequency to match the
frequency of your computer’s graphics card. If a vertical flickering
bar appears on the image, adjust the frequency until it disappears.
Tracking—Synchronizes the signal timing of the display with the
timing of your computer’s graphics card. If the image flickers or is
unstable, adjust the tracking until the image is stable.
Horizontal and Vertical Position—Moves the image left and right,
and up and down on the screen.
Reset This Menu—Resets the projector’s display settings to their
original factory settings. Select Yes to reset the menu.