Filter
Top Products
30
insTallaTion
Connecting an External IR Receiver
If infrared signals from the remote control cannot reach the projector due to excessive distance or obstructions such as
walls or cabinet doors, you can connect an external IR repeater system to the IR INPUT on the H9080FD to extend the
range of the remote control. See Figure 3-12.
IR INPUT VIDEO
S-VIDEO
COMPONENT 1 - SCART
(3.5-mm, mini
phono plug)
IR Sensor
IR Repeater
Remote Control
Figure 3-12: External IR Receiver Connection
Connecting to AC Power
The H9080FD ships with various types of AC power cords. Choose the one that is appropriate to your locale.
Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V); see
Figure 2-3. Then, connect the other end to your AC power source.