Filter
Top Products
58
6.2 RS-232 Commands
There are 2 types of commands:
Key commands
Operation commands
All commands start with 2 letters as shown in the following:
“ky” for key commands.
“op” for operations commands.
Key Commands
The following example is the syntax for key commands:
ky <keyname> [CR]
IR Codes and Keynames
No. Code 1 Keyname Remote Button Description
1. 0x01 pow.on Turn power on.
2. 0x09 pow.off Turn power off.
3. 0x15 menu Bring up or cancel menu display.
4. 0x17 enter Key pad enter.
5. 0x18 cur.down Key pad down arrow.
6. 0x1A cur.up Key pad up arrow.
7. 0x1D cur.left Key pad left arrow.
8. 0x1F cur.righ Keypad right arrow.
9. 0x80 bright Bring up or cancel brightness slide bar.
10. 0x81 contrast Bring up or cancel contrast slide bar.
11. 0x82 sharp Bring up or cancel sharpness slide bar.
12. 0x83 nr Bring up or cancel noise reduction slide bar.
13. 0x85 gam.sw Switch to the next gamma.
•
•
•
•
•
serial inTerfaCe speCifiCaTions