Filter
Top Products
31
insTallaTion
3.5 Turning on the Power
Press the ON button on the remote control to turn on the H9080FD.
The power LED indicator flashes green to indicate that it is warming up.
When the projector is ready for use, the LED indicator turns off, and the projector lights.
3.6 Changing the OSD Language
The H9080FD can display the menus in
English, Español, Français, Deutsch, Nederlands, Italiano, 繁體中文, and 简体中文.
Enter the OSD, select Language in SETUP menu, then press the or buttons to select a language. Then, press
ENTER to confirm your selection.
3.7 Adjusting the Picture Orientation
If the H9080FD is installed behind the screen, you must change the picture orientation to match the installation meth-
od. To do this, press MENU on the remote control. Then, select SETUP from the Main Menu.
Rear Projection
If the projector is used in a rear-projection application, press repeatedly to select Rear Projection from the SETUP
Menu. Press or to set it to On.
Ceiling Mode
If the projector is ceiling-mounted, the H9080FD automatically inverts the image. If this automatic inversion is not de-
sired, select Ceiling Mode from the SETUP Menu and set it to Off.
1.
2.